Tech Support

SELECTING IRt/c’s

How The Temperature Selection Guide Works
IRt/c Quick Selection Guide
How to Use Infrared Effectively
Understanding Field of View
Why Color Does Not Affect Readings
IRt/c Can Measure Obliquely
What is Emissivity?
Selecting HiE or LoE Based on Emissivity Table
Unique “Slot Spot” IRt/c’s Measure Small Rectangular Spots
IRt/c.01 Selection and Application Hints for OEMs
Does Your Application Require?

INSTALLING IRt/c’s

QUICK INSTALLATION GUIDE
Why Offsets Are Caused By Leakage Current
Checking IRt/c Ambient Temperature
Selecting Temperature Controllers
IRt/c Setup With Auto-Tune Temperature Controllers
Where is the Emissivity Adjustment?
Why the D & DX Series is Recommended for IRt/c Temperature Control Calibration
IRt/c can be used with up to 1,000 feet (300 m) of Thermocouple Extension Wire
Temperature Measurements in Steaming Environments
Fail-Safe Control Installation Methods
Air purging is Recommended when using Water Cooling
Air Purge and Air Cooling Requirements
Calibrating with Thermocouple Simulators
Measuring Objects Smaller Than the Field-of-View
Calibrating for Wide Linear Range with Adjustable Models to Standard Thermocouple Inputs
OEM Low Cost Interface
Calibration Testing Procedures
Grounding and Shielding for Electrostatic Protection and Noise Suppression
Using the IRt/c.01 in a High Electrical Noise Area
mV Output Tables for Pre-Calibrated IRt/c Models

Eurotherm Series-2000 Controller Linearization Tables
To expand the linearization of the IRt/c over a wider temperature range, use these tables with the Series-2000 configuration station. Check the table of signal output files to find the linearization tables you need for your pre-calibrated and special model IRt/c. (This link loads a large table.).

IRt/c PERFORMANCE