|
SnakeEye
– Thermal Switch for Thermal Detection
100% Inspection, 100%
Validation, Zero Scrap.
Reduce
scrap in your manufacturing process. Detect the presence of
hot objects (such as hot melt adhesive, labels, laser engravings,
seals, and pressed fit parts) with the photo-cell like, thermally
sensitive, fast thermal switch.
SnakeEye
Thermal Switches
Non-Contact Infrared Thermal Detection, Quality
Control / Inspection & Validation of Production Line Processes
which require a thermal component.
SnakeEye
Installation Instructions
SnakeEye™
Thermal Switch
Infrared Thermal Inspection for Hot Melt Adhesive
An Exergen OEM/Factory Automation Product
SnakeEye.3-LTE
Now
you can have 100% inspection of hot melt adhesive to your
product . . . not only its presence, but its position as well.
Employing new state-of-the-art infrared techniques (patent
pending), the SnakeEye provides photocell simplicity of operation,
with extraordinary thermal sensitivity to "see"
each and every bead as it is applied in real time.
The
SnakeEye Thermal Switch is installed immediately downstream
of the hot melt applicator, and provides 2 on/off photocell
type of switches as it sees the thermal presence of the leading
and trailing edges of adhesive. Sensitivity level is adjustable.
Width
of Bead
The minimum bead width at a given line speed
is specified in the chart below. Simply estimate bead width
and confirm that maximum and minimum line speeds fall within
"Recommended Applications" area.
Length
of Bead
The minimum bead length at a given line speed is specified
in the chart below. Simply measure bead length and confirm
that maximum and minimum line speeds fall within "Recommended
Applications" area.
|
