The t/c.XMTR is specifically designed to interface any model IRt/c by a simple thermocouple connector or splice. The two wire current loop can be used in any conventional 4-20mA, 0-5V or 0-10V circuit that is scaled for the temperature range of interest. For OEMs, IRt/c sensors and t/c.XMTR can be supplied pre-wired together.
Use any existing wiring, for easy low cost installation
Use existing PLC, computer or controller inputs
In line design requires no mechanical support
Pre-calibrated for IRt/c type, no span or zero adjustment necessary
Hermetically sealed construction exceeds NEMA 4, 4X, IP65, 66, 67
Stainless Steel construction can withstand harsh environments
J150
K150
J500
K500
J1200
K1200
K2100
S3000
Temperature at
4 mA
32°F (0°C)
Temperature at
20 mA
150°F (65°C)
500°F
(260°C)
1000°F
(540°C)
2000°F
(1100°C)
3000°F
(1650°C)
Accuracy
±0.1% F.S. conversion of thermocouple mV input to mA output
Speed of Response
160 msec (10Hz bandwidth)
Operating Range
32 to 158°F (0 to 70°C)
Temperature Drift
<0.02% F.S. per °C
Output Noise
<1nv rms (100Hz bandwidth)
Input Break Indication
Upscale: goes to >20 mA
Power Supply @ Load
12 VDC minimum @10; to 22 VDC minimum @1
Storage Temperature
-85 to 257°F (-65 to 125°C)
Weight
2.4 oz (68 g) with cables
Housing
Stainless steel, hermetically sealed, meets or exceeds all applicable NEMA ratings, housing electrically isolated from signal.
