|
| In-Line Pre-Calibrated 4-20 mA Transmitter |
| The t/c.XMTR is specifically designed to interface any model IRt/c by a simple thermocouple connector or splice. The two wire current loop can be used in any conventional 4-20mA, 0-5V or 0-10V circuit that is scaled for the temperature range of interest. For OEMs, IRt/c sensors and t/c.XMTR can be supplied pre-wired together. Click here for the Installation Guide |
 |
Use any existing wiring, for easy low cost installation |
|
Use existing PLC, computer or controller inputs |
|
In line design requires no mechanical support |
|
Pre-calibrated for IRt/c type, no span or zero adjustment necessary |
|
Hermetically sealed construction exceeds NEMA 4, 4X, IP65, 66, 67 |
|
Stainless Steel construction can withstand harsh environments |
|
|
|
|
J150
K150 |
J500
K500 |
J1200
K1200 |
K2100 |
S3000 |
|
|
|
|
|
| |
| Temperature at 4 mA |
32°F (0°C) |
|
| Temperature at 20 mA |
150°F (65°C) |
500°F
(260°C) |
1000°F
(540°C) |
2000°F
(1100°C) |
3000°F
(1650°C) |
|
| Accuracy |
±0.1% F.S. conversion of thermocouple mV input to mA output |
|
| Speed of Response |
160 msec (10Hz bandwidth) |
|
| Operating Range |
32 to 158°F (0 to 70°C) |
|
| Temperature Drift |
<0.02% F.S. per °C |
|
| Output Noise |
<1nv rms (100Hz bandwidth) |
|
| Input Break Indication |
Upscale: goes to >20 mA |
|
| Power Supply @ Load |
12 VDC minimum @10; to 22 VDC minimum @1K |
|
| Storage Temperature |
-85 to 257°F (-65 to 125°C) |
|
| Weight |
2.4 oz (68 g) with cables |
|
| Housing |
Stainless steel, hermetically sealed, meets or exceeds all applicable NEMA ratings, housing electrically isolated from signal. |
|
| |
|
| Back to IRt/c Accessories |
|
|
|
|
|
|
|
